FAQ

After installing a new CPU, the system fails to POST or the motherboard doesn't recognize the processor. What could be the cause?

ThecoreissueisusuallyBIOSincompatibility,thoughinrarecases,itcouldbeahardwareinstallationerror.1.First,confirmthattheCPUmatchesthemotherboardsocket.CheckforanybentpinsordamagedcontactsontheCPU.Ensurethecoolerisproperlyseatedandtheretentionclipsaretightlyfasten

2026-04-03

My SSD is not being detected in the BIOS or the operating system after installation. How do I fix this?

Let's troubleshoot M.2 and SATA SSDs separately: 1. M.2 SSD Verify that the SSD interface type (NVMe or SATA) is compatible with the motherboard's M.2 slot. Ensure the drive is fully inserted and secured with the mounting screw. Enter the BIOS&nbs

2026-04-03

All USB ports on my motherboard are unresponsive, including both front and rear ports. What should I do?

1. Temporary Fix Power off and unplug the power cord, then press and hold the power button for 10 seconds to discharge static electricity. Reconnect the power and test. Static interference is a common trigger for USB failures. 2. Settings Check Enter the 

2026-04-03

How do I troubleshoot static noise in the audio jack or a microphone that isn't picking up sound?

Theseaudioissuesareusuallycausedbyconfigurationerrorsorsignalinterference.Troubleshootingstep-by-stepisthemostefficientapproach.1.StaticNoiseTroubleshootingEnsureyouraudiocables,headphones,orspeakersareingoodcondition.Avoidbundlingthemwithpowerorvideocablestom

2026-04-03

The network shows 'Unidentified Network' or the speed is extremely slow even after plugging in the Ethernet cable. How do I fix this?

1. Basic Troubleshooting Try swapping the Ethernet cable and testing a different router port to ensure the cable isn't damaged and the router is functioning correctly. Check that the cable is fully inserted into the motherboard's LAN port—you sho

2026-04-03

After installing the motherboard, the front panel power switch, reset button, and indicator lights are not working. How do I troubleshoot this?

This issue is almost always caused by incorrect front panel wiring. Simply following the standard connection guide will solve it: 1. Pinout Identification Refer to your motherboard manual to locate the FPANEL (Front Panel) header area. Identify the p

2026-04-03